geartotal.blogg.se

Xd ir cut mini camera user manual
Xd ir cut mini camera user manual










xd ir cut mini camera user manual

When the camera is under standby mode, the camera will shut-down automatically after one minute without any working mode. Press ON / OFF button for about 6 seconds to shutdown the camera. If you want to shut down the camera under the video recording, photo taking, motion detection mode.

xd ir cut mini camera user manual

If the machine crashes, the button can not be used normally, you can use sharp objects to press reset (R) hole, then it can be used normally Or the camera will keep recording until out of battery. Insert TF card, connect USB 5V charger or power bank with USB cable, start recording videos while charging the camera.Ĭlick any button to stop recording. Note: When the battery power is low, the red and blue indicator lights flash at the same time for about 5 seconds, the camera will shut-down automatically, enter into the protection state (The recording file will save automatically), the camera should be charged under this condition. ( Please charge for more than 30 minutes to make sure the battery is fully charged.) When the red indicator light keeps on but stops flashing means charging is completed. * The red indicator light is on and flashing normally when you charge the camera. Charging while recording: Connect to external USB 5V charger or power bank. Connect the camera to computer, charge it with USB cable.Ģ. The camera built-in rechargeable lithium battery, please charge it before the first using.ġ. Boot up the camera without any working mode, the camera will shut-down automatically after one minute.Boot up the camera without TF card, the camera will shut-down automatically after the red and blue indicator flashing for 5 seconds at the same time.












Xd ir cut mini camera user manual